Płaska kratownica składająca się z czterech nachylonych prętów i jednego pręta pionowego jest obciążona w górnym węźle siłą pionową i siłą skierowaną prostopadle do płaszczyzny. Assuming the large deformation analysis and neglecting the self-weight, determine the normal forces of the members and the out-of-plane displacement of the upper node.
Wspornik wykonany z pręta okrągłego jest obciążony mimośrodową siłą osiową. Determine the maximum vertical deflection of the console using the geometrically linear and second-order analysis.
Wspornik wykonany z okrągłego pręta jest obciążony mimośrodową siłą poprzeczną. Determine the maximum deflection and maximum twist of the console using the geometrically linear analysis.
Wspornik wykonany z pręta okrągłego jest obciążony mimośrodem obciążeniem równomiernym. Determine the maximum deflection and maximum twist of the console using the geometrically linear analysis.
Symetryczna płytka konstrukcja składa się z ośmiu równych prętów kratownicowych, osadzonych w podporach przegubowych. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point when the snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at the given deflections.
Konstrukcja składa się z czterech prętów kratownicowych, osadzonych w podporach przegubowych. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point, when snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at given deflections.
Wspornik jest obciążony siłą poprzeczną i osiową na prawym końcu i jest w pełni zamocowany na lewym końcu. The problem is described by the following set of parameters. The problem is solved by using the geometrically linear analysis, second-order analysis, and large deformation analysis.
Konstrukcja z profilu I jest w pełni utwierdzona na lewym końcu i osadzona w podporze przesuwnej na prawym końcu. The structure consists of two segments. The self-weight is neglected in this example. Determine the maximum deflection of the structure, the bending moment on the fixed end, the rotation of segment 2, and the reaction force at point B by means of the geometrically linear analysis and the second-order analysis. The verification example is based on the example introduced by Gensichen and Lumpe.
Wspornik jest obciążony momentem na jego wolnym końcu. Using the geometrically linear analysis and large deformation analysis, and neglecting the beam's self-weight, determine the maximum deflections at the free end. The verification example is based on the example introduced by Gensichen and Lumpe.
Analiza czasowa belki wspornikowej (układ SDOF) wzbudzanej przez funkcję okresową. Vertical deformations and accelerations calculated with direct integration and modal analysis in RF‑/DYNAM Pro - Forced Vibrations are compared with the analytical solution.
Stalowa lina lub membrana ze sworzniami na obu końcach jest obciążona obciążeniem rozłożonym. Neglecting its self-weight, determine the maximum deflection of the structure using the large deformation analysis.
Należy określić moment zginający, działający na swobodnym końcu wspornika, który nada prętowi kształt kołowy. Neglecting the beam's self-weight, assuming the large deformation analysis, and loading the cantilever with the moment, determine its maximum deflections.
Belka podparta przegubowo na obu końcach jest obciążona w środku siłą skupioną. Neglecting its self-weight and shear stiffness, determine the beam's maximum deflection, normal force, and moment at the mid-span, assuming the second- and third-order analysis.
Stalowa belka o przekroju kwadratowym jest obciążana siłą osiową i obciążeniem rozłożonym. The image shows the calculation of the maximum bending deflection and critical load factor according to the second-order analysis.
Stalowa belka obciążona osiowo o kwadratowym przekroju jest z jednej strony zamocowana przegubowo, a z drugiej podparta sprężynami. Two cases with different spring stiffnesses are considered. The verification example solves the calculation of the load factors of the beam in the image using the linear stability analysis.